Rockwell Automation 56AMXN/B ControlLogix AutoMax Comm Module User Manual

Page 2

Advertising
background image

Page

2

AutoMax DCSNet /RE RIO Module

Publication number 56AMXN-UM002A-EN-P November 2002

Important User Information

Solid state equipment has operational characteristics differing from those
of electromechanical equipment. “Safety Guidelines for the Application,
Installation and Maintenance of Solid State Controls” (Publication SGI-
1.1) describes some important differences between solid state equipment
and hard–wired electromechanical devices. Because of this difference,
and also because of the wide variety of uses for solid state equipment, all
persons responsible for applying this equipment must satisfy themselves
that each intended application of this equipment is acceptable.

In no event will Rockwell Automation be responsible or liable for
indirect or consequential damages resulting from the use or application
of this equipment.

The examples and diagrams in this manual are included solely for
illustrative purposes. Because of the many variables and requirements
associated with any particular installation, Rockwell Automation cannot
assume responsibility or liability for actual use based on the examples
and diagrams.

Rockwell Automation assumes no patent liability with respect to use of
information, circuits, equipment, or software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without
written permission of Rockwell Automation is prohibited.

Throughout this manual we use notes to make you aware of safety
considerations.

Identifies information about practices or circumstances that can lead to
personal injury or death, property damage, or economic loss.

Attentions help you:

• identify a hazard
• avoid the hazard
• recognize the consequences

Important: Identifies information that is especially important for
successful application and understanding of the product.

Microsoft is a registered trademark of Microsoft Corporation.

Windows, Windows 95 and Windows NT are trademarks of Microsoft Corporation.

ControlLogix and Data Highway Plus are trademarks of the Allen-Bradley Company, Inc.


Advertising
This manual is related to the following products: