Rockwell Automation 56AMXN/B ControlLogix AutoMax Comm Module - Manual (Page 54)

Page 54 AutoMax DCSNet /RE RIO Module
Publication number 56AMXN-UM002A-EN-P November 2002
Using the Monitor Program
56AmxnMon is a program that lets you monitor the operation of the
56AMXN ControlLogix AutoMax module and perform maintenance
operations.
56AmxnMon displays:
• the DCS active station list
• the standard DCS diagnostic counters
• ControlLogix backplane diagnostic counters
• raw DCS registers for any drop
• raw ControlLogix input, output and status data (56AMXN/A only)
In addition, it can be used to:
• display the debug log, which consists of messages from the firmware
running on the module
• clear the debug log
• copy the contents of the debug log to the clipboard for use by another
application. This is often useful for technical support
• clear fatal errors and dump the fatal error log to a file for use by
technical support