Rockwell Automation 937CU-AISTR-DC1 Strain Gauge Converter Installation Instructions - Manual (Page 14)

12
Lowest menu level
Choose Values, Enter Numbers
At the lowest level of t. e menus, you can either choose between particular possible values for
individual parameters, or enter a numeric value.
When entering numeric values, please note:
• If you press the  or  key, the value changes stepwise.
• If you hold the  or  key for a longer time, the value "rolls" to higher or lower values.
• The sign switches automatically.
• The decimal point is moved automatically.
Lowest menu level
Parameters
OK 
current value, flashing
  ESC
, :  ESC 
new value, flashing
OK 
new value, saved, not flashing
  ESC
Bul. 937
C Strain Gauge Converter Installation Instructions
Units are automatically converted to higher units, e. g. kg to t, or a factor is displayed, e. g. factor 10
for numbers
≥ 10000.