Relays – Rockwell Automation 937CU-AISTR-DC1 Strain Gauge Converter Installation Instructions User Manual
Page 26
Advertising
Bul. 937
C Strain Gauge Converter Installation Instructions
Relays
The following figure shows the menus for the output parameters.
From the Relay 1 and Relay 2 menu options, you can use the OK key to get to a menu in which you
can enter individual parameters for the selected relay. Both menus are structured in the same way and
are thus only described once.
The activated function of a relay (Trip alarm or Fault indication) is marked by On. If you want to activate
a different function, first call this function using the S and T keys. Then press the OK key twice. After
the first OK you can cancel with ESC.
Output
——
Relay 1
——
Trip alarm
Fault indication
Relay 2
——
Trip alarm
Fault indication
I
out
24
Advertising