Rockwell Automation 937CU-AISTR-DC1 Strain Gauge Converter Installation Instructions - Manual (Page 6)

4
Mounting and Connection
The
Strain Gauge Converter can be mounted on a 35 mm standard rail corresponding to DIN EN
60175. The devices must be snapped onto the rail vertically, and never slanted or tipped to the side.
Bul. 937
C Strain Gauge Converter Installation Instructions
The Strain Gauge Converters are constructed in protection class IP20 and must
therefore be protected from undesirable environmental conditions (water, small
foreign objects).
Attention
CORRECT: Device
snapped on vertically. INCORRECT: Device snapped
on from the side. Can damage
the contacts and cause the
device to fail.