Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 59)

Chapter
3
Publication 1397-5.0 — June, 2001
Programming Terminal
Chapter 3 describes the various controls and indicators found on the
optional Human Interface Module (HIM). The material presented in
this chapter must be understood to perform the start-up procedure in
Chapter 4.
When the Drive mounted HIM is supplied, it will be accessible from
the front of the Drive as shown in Figure 3.1. The HIM has two main
functions:
• To provide a means of programming the Drive and viewing
operating parameters.
• To allow different Drive functions to be controlled.
The HIM is divided into two sections; Display & Programming
Panel and Control Panel. The Display Panel provides a means of
programming the Drive and viewing the various operating
parameters. The Control Panel allows you to control different drive
functions.
IMPORTANT: The operation of some HIM functions will depend
upon parameter settings.
Figure 3.1
Human Interface Module Sections
Display Panel
Control Panel
General
HIM Description