Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 70)

3–12 Programming Terminal
Publication 1397-5.0 — June, 2001
Search Mode
or
or
1. This mode allows you to search through the
parameter list and display all parameters that
are not at the factory default values.
A. From the Status Display, press Enter (or
any key). “Choose Mode” will be
shown.
B. Press the Increment (or Decrement) key
until “Search” is displayed.
C. Press Enter. The HIM will search
through all parameters and display any
parameters that are not at their factory
default values.
D. Press the Increment (or Decrement) key
to scroll through the list.
Choose Mode
Search
Choose Mode
Display
or
or
Control Status Mode
or
Choose Mode
Control Status
Choose Mode
Display
Control Logic
Disabled
Control Status
Control Logic
1. This mode allows the Drive logic mask to be
disabled, thus preventing a Serial Fault
when the HIM is removed with Drive power
applied.
A. From the Status Display, press Enter (or
any key). “Choose Mode” will be
shown.
B. Press the Increment (or Decrement) key
until “Control Status” is displayed. Press
Enter.
C. Select “Control Logic” using the
Increment/Decrement keys. Press Enter.
D. Press the SELect key, then use the
Increment (or Decrement) key to select
“Disabled” (or “Enable”).
E. Press Enter. The logic mask is now
disabled (or enabled).