Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 126)

Publication 1760-UM001D-EN-P - September 2005
5-2 Save and Load Circuit Diagrams
Memory Module The following memory modules are available as Pico accessories.
Programs, including all relevant data, can be transferred from the
1760-MM2B memory module to the Series B Pico Controllers. The
existing 1760-MM1 and 1760-MM2 memory modules are Read-Only
when used with Series B Pico Controllers. The 1760-MM2B memory
module will not work with Series A Pico Controllers.
Each 1760-MM2B memory module can hold one Pico program, up to
32K.
Information stored on the memory module is ’non-volatile’. Because
the information is not lost when the power is turned off, you can use
the module to make a backup copy of your program and/or to
transfer it to another Pico device.
The following information is saved to the memory module:
• the program
• all parameter settings of the program
• all text displays
• system settings
– debounce (input delay)
– P-buttons
– password
– retention on/off
Insert the memory module into the open interface slot.
.
Pico Controller Memory Module
1760-L12xxx 1760-MM1 (Series A only)
1760-L18xxx 1760-MM2 (Series A only)
Series B Pico Controllers 1760-MM2B
1
1
2
2