Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 24)

Publication 1760-UM001D-EN-P - September 2005
1-12 System Overview
Selecting or Toggling Between Menu Items
Cursor Display
There are two different cursor types: flashing block and flashing
cursor.
Full block navigation is shown as a flashing block:
• Move cursor with the left/right arrows
• In circuit diagram also with up/down arrows
Parameter change cursor flashes the selected parameter:
• Change position with left/right arrows
• Change values with up/down arrows
Flashing values/menus are highlighted in grey in this manual.
Setting Values
PROGRAM ...
RUN
PARAMETER
INFO
Ok
Cursor up or down
Select or Toggle
Highlighted
choice flashes
HH:MM 14:23
DD.MM
YEAR 2004
17.03
HH:MM 1 4 :23
DD.MM
YEAR 2004
17.03
HH:MM 1 4 :23
DD.MM
YEAR 2004
17.03
Esc
Ok
Change value = up/down arrows
Move cursor between parameters = left/right
arrows
Stores Entries
Retain previous value
Left/right arrow moves the
cursor between the day and
time digits.
Up/down arrow changes the
value of the parameter.
Up arrow = increment
Down arrow = decrement