Connect the incoming power, Connect the incoming power -9, Wire size – Rockwell Automation 1760-xxxx Pico Controller User Manual User Manual
Page 33
Advertising
Publication 1760-UM001D-EN-P - September 2005
Installation 2-9
Wire Size
• Solid
AWG 22 to AWG 12
• Stranded
AWG 22 to AWG 12
Connect the Incoming
Power
For incoming power technical specifications, refer to Appendix A.
1760-L12AWA, -L12AWA-NC, -L12AWA-ND, -L18AWA,
ATTENTION
ELECTRICAL SHOCK HAZARD
The memory module and PC-cable socket are at the
potential of L2. There is a danger of electric shock if
L2 is not grounded. Do not make contact with
electrical components under the socket cover.
TIP
A brief current surge is produced when powering on
the unit for the first time. Do not switch the unit
using reed contacts, since these may burn or melt.
L1
L2
I2
I3
I4
I5
I6
I7
I8
I1
100 - 240V ac
50/60Hz
Inputs x 100 - 240V ac
L2
F1
L1
Advertising