Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 30)

Publication 1760-UM001D-EN-P - September 2005
2-6 Installation
Install the Remote
Processor The remote processor is used for terminal mode operation of Pico
controllers and I/O modules. The remote processor is used with either
a Display or Display/Keypad Unit.
Remote Processor Terminal Operation
Flush Mount
Flush Mount the Display and Remote Processor
1. Insert the display unit through the mounting holes on the panel.
2. Attach the fixing rings.
3. Attach the processor unit.
C S E K O
L E D L A T
C S E K O
L E D L A T
1760-L12... 1760-L18...
1760-L20...
1760-LDF ...
1760-RM
1760-RM-Pico
1760-RM-GFX
1760-GFX
Display Unit
Front View
1
2
3
M = 1.2 – 2 Nm
10.6 - 17.7 lb-in
2