Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 201)

Publication 1760-UM001D-EN-P - September 2005
Specifications A-11
Transistor Outputs
Output Specifications
Filament Lamp Load 1000 W at 230/240V ac/25,000 operations
500 W at 115/120V ac/25,000 operations
Fluorescent Tube with Ballast 10 x 58 W at 230/240V ac/25,000 operations
Conventional Fluorescent Tube,
Compensated 1 x 58 W at 230/240V ac/25,000 operations
Fluorescent Tube, Uncompensated 10 x 58 W at 230/240V ac/25,000 operations
Relay Operating Frequency
Mechanical Switching Operations
10 million (10
7
)
Mechanical Switching Frequency 10 Hz
Resistive Lamp Load 2 Hz
Inductive Load 0.5 Hz
Specification 1760-L12AWA
1760-L12AWA-NC
1760-L12AWA-ND
1760-L12BWB
1760-L12BWB-NC
1760-L12BWB-ND
1760-L12DWD
1760-L12DWD-ND
1760-L12NWN
1760-L12NWN-ND 1760-L18AWA
1760-L18AWA-EX
1760-L18AWA-EXND
1760-L18BWB-EX
1760-L18BWB-EXND
1760-L18DWD-EX
1760-L18DWD-EXND
1760-L18NWN-EX
1760-L18NWN-EXND
1760-IA12XOW6I
1760-IB12XOW6I
1760-OW2
Specification 1760-L12BBB
1760-L12BBB-ND 1760-IB12XOB8
1760-L20BBB-EX
1760-L20BBB-EXND
Number of Outputs 4 8
Output Type semiconductors
Rated Voltage 24V dc
Permissible Range 20.4 to 28.8V dc
Residual Ripple ≤ 5%
Supply Current
Outputs OFF 18 mA nominal, 32 mA maximum
Outputs ON 24 mA nominal, 44 mA maximum