Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 129)

Publication 1760-UM001D-EN-P - September 2005
Save and Load Circuit Diagrams 5-5
PicoSoft PicoSoft and PicoSoft Pro are PC programs for creating, testing and
managing Pico programs. You should only transfer data between the
PC and Pico using the special PC interface cable, 1760-CBL-PM02,
which is available as an optional accessory.
Software Compatibility
If you are using programming software to program the Pico controller,
be sure that you are using the correct software version.
Find the Series Letter
The Series letter is printed on the side of the housing as shown.
Download the Software
You can download a free copy of PicoSoft version 6.1 from our web
site. Go to http://www.ab.com/picosoft6.
To receive PicoSoft Pro, please contact your Allen-Bradley Distributor
or Rockwell Automation representative.
TIP
PicoSoft software is available at no charge from
www.ab.com/pico. PicoSoft Pro software is a
purchasable product for use with both Pico and Pico
GFX controllers.
IMPORTANT
You must use PicoSoft version 6.1 or higher for the
Series B Pico controller. Earlier versions of PicoSoft
can only be used with Series A Pico controllers.