Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 105)

1 Publication 1757-IN040B-EN-P - March 2002
Chapter
5
ProcessLogix Client Installation and Upgrade
Procedures
Introduction Two levels of the ProcessLogix Client workstation software installation
are available:
•
Operator Workstation
•
Engineering Workstation
Operator Workstation allows remote connections to the ProcessLogix
Server.
Engineering Workstation has all the functionality of the Operator
Workstation but also includes the ProcessLogix Engineering Tools.
From the Engineering Workstation, an engineer using Control Builder
can remotely access and modify the 1757-PLX52 ERDB database.
R400.0 Client Software
R400.0 Station Software includes the new interface for communication
with a R400.0 Server. Also included are updated System Displays,
Display Builder. HMIWeb Display Builder is a new architecture for the
Client software which incorporates HTML technology into the client
software. This new architecture is supported along side the existing
display (DSP) architecture. R400.0 Engineering Tools Software
includes the new interface for communication with a R400.0
ProcessLogix Server.