Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 169)

Publication 1757-IN040B-EN-P - March 2002
Firmware Maintenance Procedures 7-11
11. Wait for the load to complete and the 1757-PLX52, TC-MUX021,
or 1757-FIM module to reboot to its ALIVE status as shown in
the module LED display. The Status field in the lower portion of
the Network Tools window tracks the load progress.
12. Click OK to acknowledge the load completion with no errors.
13. Confirm that the LED display on the 1757-PLX52 or TC-MUX021
module shows ALIVE.
Loading Personality Image
1. With the 1757-PLX52, TC-MUX021, or 1757-FIM module in its
ALIVE state, click the 1757-PLX52, TC-MUX021, or 1757-FIM
module in the Detail pane.
2. Click Firmware to initiate the firmware update.
3. Click Yes to acknowledge the Warning prompt.
4. To load the personality image to a 1757-PLX52, locate the
cee50.pcm personality (rex) file. See Table 7.A on page 7-5.
5. To load the personality image to a TC-MUX021, locate the
simrex.pcm personality (rex) file. See Table 7.A on page 7-5.
TIP
You should load the cee5.pcm file for CEE-5ms.