Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 189)

Publication 1757-IN040B-EN-P - March 2002
Supplementary Procedures 8-15
Installing VirusScan NT and Configuring Directories for Scan
Exclusion
Use the following procedure to install the Network Associates
VirusScan NT program and configure directories to be excluded from
the virus scan.
1. Follow the manufacturer’s instructions and on-screen prompts to
install the Network Associates VirusScan NT software on your
PC.
2. When the option to use System or Custom Account appears,
select Custom Account
3. Enter your password.
4. Once the VirusScan NT program is installed, click
Start
⇒
Programs
⇒
Network Associates VirusScan NT
⇒
VirusScan
NT Console to call up the Console.
5. In the Console, click Scan
⇒
Properties to call up the Properties
dialog box for your PC.
6. Click the Exclusions tab.
7. Click Add to call up the Add Exclusion Item dialog box.
8. Key this path into the Open entry field or use Browse to
navigate to:
>C:\Honeywell\server\data<
9. Click Add to call up the Add Exclusion Item dialog box.
10. Key in >C:\Honeywell\TPS50\SYSTEM\ER < in the File, folder
or drive to exclude field and click OK to accept this path.
11. Click OK to close the Properties dialog box.
12. Click Scan
⇒
Exit to close the Console.