Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 30)

Publication 1757-IN040B-EN-P - March 2002
2-4 Operating System Installation Procedures
8. Follow the on-screen prompts for inserting, labeling, and
creating the four floppy disks.
9. When all the boot floppies have been made, shut down the PC.
Starting the Installation from the Boot Floppies
1. With the PCs’ power off, insert the diskette titled Windows 2000
Setup Boot Disk into the floppy disk drive.
2. Turn on the PC.
3. Insert the Microsoft Windows 2000 Server CD into the CD-ROM
drive.
4. Follow the on-screen prompts to remove and insert the
Windows 2000 Server Setup Disks 2, 3, and 4 when instructed to
do so.
5. Continue with Completing the Windows 2000 Server Installation
on page 2-5.
Starting the Installation from the CD-ROM
1. Turn on the PC.
2. Insert the Microsoft Windows 2000 Server CD into the CD-ROM
drive.
3. When prompted, enter into the computer’s BIOS setup program.
4. Verify that the Boot Priority has the CD-ROM device listed first.
(Before the floppy or hard disk devices.)
5. Exit the BIOS and save the setting.
IMPORTANT
Server Boot floppies and Professional Boot floppies
are different.