Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 181)

Publication 1757-IN040B-EN-P - March 2002
Supplementary Procedures 8-7
7. Restart the PC.
Manual System
Backup/Restore
Procedures Backing Up a ProcessLogix R400.0 Server to Tape
For information on backing up a ProcessLogix R400.0 Server to tape,
contact Rockwell Automation Tech Support, refer to Rockwell
Automation Technical Support on page P-4.
Restoring a ProcessLogix Server System From a Backup Tape
For information on restoring the ProcessLogix R400.0 Server system
previously backed up to tape, contact Rockwell Automation Tech
Support, refer to Rockwell Automation Technical Support on
page P-4.
ATTENTION
!
Before installing or uninstalling any software
component, you MUST exit all ProcessLogix
applications and stop all ProcessLogix services.
Refer to Stopping ProcessLogix Applications and
Services on page 8-1.
Replacing ProcessLogix R400.0 subsystems is
different from prior ProcessLogix releases, previous
techniques do NOT work from ProcessLogix R400.0.
These procedures do NOT support ProcessLogix
R400.0 upgrades.