Rockwell Automation 1757-SWKIT4000 ProcessLogix R400.0 Installation and Upgrade Guide - Manual (Page 119)

Publication 1757-IN040B-EN-P - March 2002
ProcessLogix Client Installation and Upgrade Procedures 5-15
Recording the NT System Path Value
If you are running Windows NT, you MUST record the NT System
Path before installing Windows Installer.
1. Click Start
⇒
Settings
⇒
Control Panel.
2. Double-click the System icon.
3. Click the Environment tab.
4. Select the Path from the System Variables list.
5. Record the Path Value.
Installing Windows Installer
Follow the procedure below to install Windows Installer.
1. Insert the ProcessLogix R400.0 Software CD 2 into the CD-ROM
drive.
2. Click Start
⇒
Run.
3. Key in this path location in the Open entry field or use Browse
to navigate to the file instmsiw.exe and click Open.
>D:(or your CD-ROM drive letter)\Update\instmsiw.exe<
4. Click OK.
5. If prompted, click Yes to restart the PC. Otherwise, click OK and
restart the PC.
Verifying the NT System Path Value
1. Click Start
⇒
Settings
⇒
Control Panel.
TIP
Use Notepad to create a file C:\path.txt. Copy the
path value into this file and save.