Rockwell Automation 1785-KA5P/B DHP COMM. ADAPATER MOD. - Manual (Page 12)

Chapter
2
2-1
Installing the 1785ĆKA5
Communication Adapter Module
This chapter explains how to install the 1785-KA5 module in a 1771 I/O
rack or in a stand-alone panel mount setup. It contains the following
sections:
the European Union Directive Compliance
setting the switches
installing the 1785-KA5 module in an I/O rack
installing the 1785-KA5 panel-mount version
connecting the module
powering
up
If this product is installed within the European Union or EEA regions and
has the CE mark, the following regulations apply.
EMC Directive
This apparatus is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) using a technical construction file
and the following standards, in whole or in part:
EN 50081-2 EMC – Generic Emission Standard, Part 2 – Industrial
Environment
EN 50082-2 EMC – Generic Immunity Standard, Part 2 – Industrial
Environment
The product described in this manual is intended for use in an industrial
environment.
Low Voltage Directive
This apparatus is also designed to meet Council Directive 73/23/EEC
Low Voltage, by applying the safety requirements of EN 61131–2
Programmable Controllers, Part 2 – Equipment Requirements and Tests.
For specific information that the above norm requires, see the appropriate
sections in this manual, as well as the following Allen-Bradley publications:
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1
Guidelines for Handling Lithium Batteries, publication AG-5.4
Automation Systems Catalog, publication B111
What this Chapter Contains
European Union Directive
Compliance