Rockwell Automation 1785-KA5P/B DHP COMM. ADAPATER MOD. - Manual (Page 42)

Communicating through the 1785ĆKA5
Communication Adapter Module
Chapter 3
3-14
The monitor display screen allows you to monitor the status of the
message instruction while the processor is running.
Display Area:
Message:
Prompt:
Data/Cmd Entry:
Status:
Type:
Read/Write:
Target Device:
Channel: F10
Target Node: F1
Remote Bridge Link ID:
Remote Bridge Node Address:
Local Bridge Node Address:
Local/Remote:
Control Block:
Destination/Source File Address:
Target SRC/Dst File Address:
Message Length in Elements:
Message Timeout (seconds): F8
ERROR CODE:
Error Code Desc:
0 control bit address: N10 : 0/8
Peer-to-Peer
READ
500CPU
1
3
2
0
4
Remote
N10 : 0
N7 : 0
N7 : 50
5
20
ignore if timed out:
continuous run:
error:
message done:
message transmitting
message enabled
to be retried:
awaiting execution:
waiting for queue space:
TO
CO
ER
DN
ST
EN
NR
EW
WQ
0
0
0
0
0
0
0
0
0
Press a function key or press <ESC> to exit monitor
offline no forces INSTR INSERT File 009
Main Functions:
F1 F6 F8 F9
TARGET
NODE
TARGET
ADDRESS
MESSAGE
TIMEOUT
TOGGLE
BIT
In this screen, the 5/03 processor reads 5 elements (words)
from Target node 3 of Remote Bridge LINK_ID 2, starting at
word N7:50. If 20 seconds elapse without a reply,
error bit N10:012 will be set, indicating that the instruction
has timed out. The device at node 3 of Remote Bridge
LINK_ID 2 understands the SLC family protocol.
F6