Rockwell Automation 1785-KA5P/B DHP COMM. ADAPATER MOD. - Manual (Page 22)

Installing the 1785ĆKA5
Communication Adapter Module
Chapter 2
2-11
To connect the 1785-KA5 module:
1. Use the 3-pin port labeled Data Hwy Plus to connect the DH+
dropline (100 ft. max.) or the daisy-chained cable to the 1785-KA5
module. Connect the Allen-Bradley cable (cat. no. 1770-CD) to the
3-pin plug as shown:
Blue (2)
Shield (SH)
Clear (1)
20224
1770ĆCD
Cable
2. Use the 9-pin D-shell port labeled Data Hwy Plus to connect your
programming terminal (such as the 1784-T50 programming terminal
used with a 1784-CP cable) to the DH+ network:
Pin Signal
1 (clear) signal wire
5 (blue) signal wire
7 (bare) cable shield wire