Rockwell Automation 1785-KA5P/B DHP COMM. ADAPATER MOD. - Manual (Page 21)

Installing the 1785ĆKA5
Communication Adapter Module
Chapter 2
2-10
Important: Make sure the enclosure leaves a 6 inch (minimum) clearance
at the top and bottom of the module for air flow.
After you mount the module, you are ready to make connections.
Figure 2.3 shows the ports on the front panel of the 1785-KA5 module:
Figure 2.3
1785ĆKA5 connectors
DH+
DH+
Programming
Terminal
DH485
Power Supply
Cat. No. 1785ĆKA5/A
rackĆmount module
Cat. No. 1785ĆKA5P/A
panelĆmount module
AUX
(for programmer)
19195
Connecting the 1785ĆKA5
Module