3ć11, Assembly and installation chapter 3, Chassis prećassembly – Rockwell Automation 1772-LV,D17726.6.1 A and I MNL MINI-PLC-2/15 PROCESSO User Manual
Page 31
Advertising
Assembly and Installation
Chapter 3
3Ć11
Before the Mini-PLC-2/15 Controller is mounted to an enclosure, the I/O
Chassis must be partly assembled. This involves setting the Switch Group
Assembly, installing keying bands and installing the Battery Pack. In addition,
if the side mounting configuration is used, the System Power Supply should be
mounted to the Chassis before the Chassis is mounted to the enclosure back
panel.
Figure 3.8
Ground Bus Connection Details
Ground bus
Tapped hole
Ground lug
Bolt
Star washer
10116ĆI
Figure 3.9
Ground Bus Connections
Ground Bus
Ground Bus Mounting
Grounding Electrode
Conductor to
GroundingĆElectrode System
Equipment
Grounding
Conductors
10117ĆI
Ground Lug
Chassis PreĆAssembly
Advertising