Rockwell Automation 1772-LV,D17726.6.1 A and I MNL MINI-PLC-2/15 PROCESSO - Manual (Page 39)

Assembly and Installation
Chapter 3
3Ć19
Figure 3.18
I/O Chassis Dimensions
14.15”
(35.94cm)
24.15”
(61.34cm)
23.4”
(59.44cm)
13.4”
(34.04cm)
10.0”
(25.4cm)
11.25”
(28.5cm)
6.75”
(17.15cm)
8.51”
(21.62cm)
128 I/O
64 I/O
64 I/O
128 I/O
10124-I
I/O Power Cable
For ease of installation, the I/O Power Cable is installed prior to installing the
Mini-PLC-2/15 Processor Module. The I/O Power Cable comes in two lengths
to accommodate either Power Supply mounting configuration:
1 ft/30.5 cm (Cat. No. 1771-CL)
5 ft/1.5 m (Cat. No. 1771-CM)
The I/O Power Cable (Figure 3.21) has three plugs: one 3-pin plug and two
9-pin plugs that are labeled for proper connection. The 3-pin plug connects to
the base of the Battery Pack. One 9-pin plug fits into the socket at the base of
the Power Supply and the other 9-pin plug connects to the I/O Chassis socket.
Side snap-lock levers hold the plug in the socket. To disconnect a cable, squeeze
in on the snap-lock levers and pull gently.