Assembly and installation chapter 3 – Rockwell Automation 1772-LV,D17726.6.1 A and I MNL MINI-PLC-2/15 PROCESSO User Manual
Page 36
![background image](/manuals/579314/36/background.png)
Assembly and Installation
Chapter 3
3Ć16
Figure 3.15
Lithium Battery Installation
10120bĆI
10680ĆI
-
+
Orientation
-
+
Lithium
Battery
Battery Contacts
Figure 3.16
Keying Band Installation
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
Keying
Bands
Backplane
Socket
10112-I
Keying Bands
Plastic keying bands (Cat. No. 1777-RK), shipped with each I/O Chassis, can be
inserted into the top backplane sockets of the I/O Chassis (Figure 3.16). they
are used to ensure that the correct I/O Modules are installed in the correct
Module slots. They are also used to key the Module slot for the Mini-PLC-2/15
Processor. Needle-nose pliers can be used to install the keying bands. The
numbers to the right of the backplane sockets serve as a guide for positioning
the keying bands. The keying band positions for the 1771 I/O Modules and
Processor Module are listed in Table 2-1.