Rockwell Automation 1772-LV,D17726.6.1 A and I MNL MINI-PLC-2/15 PROCESSO - Manual (Page 38)

Assembly and Installation
Chapter 3
3Ć18
Once the Chassis and Power Supply are mounted, the remaining Controller
parts can be installed in the I/O Chassis. This includes installing the I/O Power
Cable, keying bands, EPROM, Processor, Field Wiring Arms and I/O Modules.
Figure 3.17
Mounting Assembly Details
10123ĆI
Ground Lug
Flat Washer
Back Panel
Ground Bus or
Mounting Bracket
Star Washer
Scrape paint and use
star washer
Tapped
Hole
Bolt
Use a wire brush to
Back Wall
of Enclosure
Welded Stud
Scrape paint and
use star washer
Stud Mounting of this
Back Panel to the
Back Wall of the
Bolt Mounting of a
Ground Bus ora Chassis
to the Back Panel
Stud Mounting of a
Ground Bus or Chassis
to the Back Panel
Ground Lug
Flat Washer
Welded Stud Back Panel
Scrape paint
Ground Bus or
Mounting Bracket
Star Washer
remove paint from
threads to allow a
ground connection.
Enclosure
I/O Chassis Assembly