Rockwell Automation 1772-LV,D17726.6.1 A and I MNL MINI-PLC-2/15 PROCESSO - Manual (Page 6)

Chapter
2
2Ć1
Controller Components
The Mini-PLC-2/15 Programmable Controller (Figure 2.1) is made up of the
following major components:
System Power Supply(Cat. No. 1771-P1)
I/O Chassis (Cat. No. 1771-A1, -A2 or -A4)
Mini-PLC-2/15 Processor Module (Cat. No. 1772-LV)
A number of Bulletin 1771 I/O Modules.
Each of these components and their associated cables must be specified by the
user when ordering the Mini-PLC-2/15 Programmable Controller. This section
will identify and describe the hardware associated with each of these Mini-PLC-
2/15 Controller components. This will enable the user to assemble and install
the components as described in Chapter 3. For additional information, refer to
the respective Product Data Sheet for the component.
General