Black Box LRU4240 - Manual (Page 141)

Dual Trunk E1 Router
Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 931 2233 129
Table D-37 Menu-8C Miscellaneous Management Configuration
NET Alarms AIS Received Alarm —Enabled, Disabled
Enabled—The unit generates an alarm when a Network AIS (Alarm
Indication Signal) is detected.
Disabled—Disables the alarm.
RAI Received Alarm —Enabled, Disabled
Enabled—The unit generates an alarm when a Network RAI Alarm is
detected.
Disabled—Disables the alarm.
Enabled
Enabled
Parameter—Options; Definitions
Connection —In-band, Modem, Direct
Select the type of connection you are using.
In-band—Enables an in-band connection to the unit.
Modem—Enables a modem connection to the unit.
Direct—Enables a direct terminal connection to unit.
Timeout When Logged On —1 Min, 10 Min, 30 Min, Unlimited
Applies only when you are logged on. This is the time span after which, if it does not
detect activity, the system warns that you will be logged off in 30 seconds.
Timeout When Not Logged On —1 Min, 10 Min, 30 Min, Unlimited
Applies only when a terminal is connected through a modem and you are not logged
on.This is the time span after which the modem disconnects the phone line if no
activity is detected.
Phone Number 1
Enter a Hayes-compatible modem dial string (20 char. maximum); for example,
“atdt555-1212”. The modem dials out using the first telephone number, then
automatically tries the second telephone number if the first does not respond.
Phone Number 2
Enter a Hayes-compatible modem dial string (20 char. maximum); for example,
“atdt555-1212”.
Normal User Passwor d—(text string)
Enter the login password for the Normal User (20 char. maximum).
Super User Password —(text string)
Enter the login password for the Super User (20 char. maximum).
DLC IBC Link Loss Alarm —Enabled or Disabled
The IBC link specific to Dual Trunk E1 Router . When the connection is disrupted,
an alarm is sent.
Dial Out Time Interval—Dial out time interval is the minimum amount of time the
Dual Trunk E1 Router waits between dial outs to the host computer.
In-band Link Loss Alarm —Enabled or Disabled
Enabled—When loss of HDLC frames or idle characters occurs, an alarm is generated.
Disabled—The alarm is disabled
Primary
Parameters Parameter—Options;
Definition
Default