Firewall configuration, Configuring the firewall, Chapter 7, firewall configuration – Black Box LRU4240 User Manual
Page 75: Chapter 7, “ firewall configuration, Dual trunk e1 router, Onfiguring, Irewall
Dual Trunk E1 Router
Dual Trunk E1 Router User’s Guide
TECHNICAL: 0118 96 56 000
63
Firewall Configuration
7
The Firewall table is an access list that filters packets by denying or permitting access from source
hosts to destination hosts. The rules are applied according to the order set in each entry in the list.
The first match determines whether or not the packet is accepted or denied by the router. If a packet
passes a first match and is not denied access, subsequent rules are applied on the packet. The default
access setting is to deny all access.
..
C
ONFIGURING
THE
F
IREWALL
You need to enable first the Firewall on menu $A, before you activate entries in the Firewall table.
Table 7-1
Router configuration procedures
Procedure
Description
Menu
Reference
Configuring Firewall
The Firewall table lets you set an access list of up to
150 entries to permit or deny access based on the
source or destination IP addresses.
The default Firewall setting is to deny all access.
Menu-$H
1
2
3
4
5
6