Black Box LRU4240 - Manual (Page 57)

Dual Trunk E1 Router
Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 45
C
ONFIGURING
T
IME AND
D
ATE
S
YNCHRONIZATION
Setting Third NMS IP addresses 1.Select 3rd NMS IP Address field
1.Enter IP address. The router will send trap messages to this
server.
2.Select 3rd Output Port field
3.Selects the port (COMM, NET, or Ethernet) over which the router will
send trap to the 1st NMS IP address. Default port is COMM..
Table 4-17 Configuring Time and Date Synchronization
Procedure Steps
Setting Time server synchronization 1.Select Menu-
2.Set Days, Hours, and Minutes frequency
Configuring Primary Time Server IP
Addresse 1.Select Time Src Primary IP Address field
2.Enter Time Server Primary IP address
3.Select physical port of which Time Server is connected to. ENET, ot
NET.
Configuring Secondary Time Server
IP Addresse 1.Select Time Src Secondary IP Address field
2.Enter Time Server Primary IP address
The router accesses both the primary and secondary time servers from the
same port.
Enable Time Synchonization 1.Select Automatic Sync field and set it to Enabled.
The router Time Client will start synchronizing time and date with the
designated Time Server.
Table 4-16 Configuring Menu-0B SNMP
Procedure Steps