Rockwell Automation 1747-KFC15 SLC500 CONTROLNET RS-232 USER MANUAL - Manual (Page 13)

Introducing the 1747-KFC15 Module 1-3
1747-5.34 - June 1998
The KFC15 module has two ports for device connections:
RS-232C serial port—provides half- or full-duplex communication with
a serial port on your SLC500 processor.
network access port—lets you connect a ControlNet programming
terminal or other device to the KFC15 module for full network access
without disrupting the cable wiring
The serial port uses DF1 protocol while the network access port handles
ControlNet packets directly.
Status LEDs and the dot matrix display on the front of the KFC15 indicate
current operating conditions of the unit and communication activities
taking place through the ports.
Display on the
1747-KFC15
module
30662-M
30665-M
RS-232C
RS-232C