Appendix c - df1 diagnostic command support, Appendix c df1 diagnostic command support, Df1 diagnostic command support – Rockwell Automation 1747-KFC15 SLC500 CONTROLNET RS-232 USER MANUAL User Manual
Page 43: Appendix
Advertising
1747-5.34 - June 1998
Appendix
C
DF1 Diagnostic Command Support
The information in this appendix deals with DF1 communications
between the host processor and KFC15 module. The KFC15 module
interprets and responds to the following diagnostic commands from
its DF1 RS-232 serial port:
In the Command and Reply Format tables below, all values are in hex
and the following abbreviations are used:
ADDR - address of data to be read
CMD - command code
FNC - function code
STS - status code
TNS - transaction number
Description
Command Byte
Function Code (hex)
Diagnostic Loop
06
00
Diagnostic Read Counters
06
01
Diagnostic Status
06
03
Reset Diagnostic Counters
06
07
Advertising