Connecting a device to the network access port – Rockwell Automation 1747-KFC15 SLC500 CONTROLNET RS-232 USER MANUAL User Manual
Page 27
Advertising
Installing the KFC15 Module
3-3
1784-5.34 - June 1998
6. Connect the KFC15 module to your SLC500 processor with the supplied
RS-232 cable.
7. Apply power to your SLC500 chassis.
Connecting a Device to the Network Access Port
Use the isolated network access port to connect a transitory device, such
as a programming device, to the KFC15 module.
Cables
You must use the Allen-Bradley Network Access cable
(cat. no. 1786-CP).
30664-M
RS-232 cable
Advertising