Rockwell Automation 1747-KFC15 SLC500 CONTROLNET RS-232 USER MANUAL - Manual (Page 14)

1-4 Introducing the 1747-KFC15 Module
1747-5.34 - June 1998
You use the three banks of DIP switches to configure the RS-232C serial
communication parameters. Two rotary switches are available to set the
ControlNet network address. To verify your settings, you can use the dot
matrix display located on the front of the module. Refer to Chapter 2 and
Chapter 4 for more information.
30666-M
Top View of Module
Rotary Switches
30663-M
3 Banks of
DIP Switches