Dip switches – Rockwell Automation 1747-KFC15 SLC500 CONTROLNET RS-232 USER MANUAL User Manual
Page 20
Advertising
![background image](/manuals/579552/20/background.png)
2-2
Configuring the KFC15 Module
1747-5.34 - June 1998
DIP Switches
Located within the body of the 1747-KFC15 module are three banks (S1,
S2, and S3) of eight DIP switches. These switches are used to configure
the RS-232 serial communication port.
Important: The communication parameters between the SLC500 and the
KFC15 must be identical. Refer to Chapter 4 for more information.
Use a ball-point pen to set any of the switches within the three banks to on
or off.
Important: Do not use a pencil because the tip can break off and short the
switch.
ON
1 2 3 4 5 6 7 8
30663-M
The white area
indicates the position
of the switch specified
as on.
S1
S2
S3
Advertising