Rockwell Automation 1794-IE4XOE2,1794-IE8,1794-OE4,D17946.5.2 FLEX I/O ANALOG MODULE - Manual (Page 3)

Publication 1794Ć6.5.2 - May 1996
Summary of Changes
This publication contains new and revised information not included
in the previous version.
New Information
Addition of DeviceNet Mapping
A new chapter has been added to describe the special mapping for
DeviceNet.
Additional Flex I/O Modules
New series B analog modules are now available for Flex I/O users.
These modules are:
•
1794-OE4 series B 4 output analog module
•
1794-IE8 series B 8 input analog module
•
1794-IE4XOE2 series B 4 in/2 out combo analog module
The differences between series A and series B are explained in
Appendix B.
I/O Mapping
I/O mapping for the series B versions of the analog modules has
been added.
Revised Information
This manual has been revised to include separate chapters for remote
I/O adapters and DeviceNet adapters. In addition, range selection bits
have been revised to include an Off condition.
Change Bars
The areas in this manual which are different from previous editions
are marked with change bars (as shown to the right of this paragraph)
to indicate the addition of new or revised information.