Rockwell Automation 1784-KTCS ControlNET Scanner Installation Instructions - Manual (Page 12)

12 ControlNet Scanner Card
Publication 1784-5.35 – April 1999
3. If you are using the card’s default memory address setting, go to step 4.
If you are setting a new base memory address, set the switches to the up or
down position to reflect the selected address from Worksheet C.
20629–M
up (1)
down (0)
Side View Front View up (1)
down (0)
1 2 1 2 3 4
D000:0000
Factory-set address
(recommended setting)
Front of Switches
S2 S1