Rockwell Automation 1784-KTCS ControlNET Scanner Installation Instructions - Manual (Page 26)

26 ControlNet Scanner Card
Publication 1784-5.35 – April 1999
Connecting the Card Directly to the ControlNet Network
To connect the card directly to a ControlNet network as shown in Figure 6,
follow the instructions in these publications:
•
ControlNet Tap Installation Instructions, publication 1786-5.7
•
ControlNet Cable Planning and Installation Manual, publication 1786-6.2.1
Figure 6
1784-KTCS card connected directly to a ControlNet network
1784-KTCS desktop
host
computer
ControlNet network
1786-TPR, -TPS, -TPYR, or -TPYS tap
Channel A
Channel B
Interpreting the Status Indicators on the KTCS
The status indicators on the card give you information about the card and the
network when you’re connected via the BNC connectors. Table B outlines the
states and explains what each state means to you and the action you should take,
if any, to correct that state.