Rockwell Automation 1784-KTCS ControlNET Scanner Installation Instructions - Manual (Page 19)

ControlNet Scanner Card 19
Publication 1784-5.35 – April 1999
9. Choose a destination location.
You see the Setup progress bar, followed by the “Setup Complete” screen.
10. Check the checkboxes on the “Setup Complete” screen to choose to view the
Read Me file and/or to launch the IOLinx configuration tool.
The IOLinx configuration applet may be launched at a later time from the
Control Panel (Start➝Settings➝Control Panel).
Important: The configuration applet must be run before IOLinx is
started for the first time.
11. Click Finish to complete Setup.
Running the 1784-KTCS Installation Check Wizard
The installation check wizard is copied to your computer when the IOLinx
software is installed, and appears in your menu (Program Files➝Rockwell
Automation➝IOLinx for ControlNet➝Check Wizard).
To make sure you have installed the card properly, run the installation check
wizard. Follow these steps:
1. Launch the 1784-KTCS Installation Wizard.
You see the Welcome screen. The wizard guides you through a series of
steps to be certain that your 1784-KTCS card is installed correctly.
2. Click Next to continue.
The wizard prepares to copy the necessary files to your system directory.
3. Click Next to continue.
The wizard copies the files to your system directory and brings up the Select
I/O Address window.