Rockwell Automation 1784-KTCS ControlNET Scanner Installation Instructions - Manual (Page 17)

ControlNet Scanner Card 17
Publication 1784-5.35 – April 1999
Note: The CD-ROM will carry the Windows Autorun. Once inserted into
the CD-ROM drive, if you have Autorun configured, the IOLinx software
installation will automatically start at the first setup screen.
If Autorun is not configured, go to step 2.
2. From the Start menu, choose Run.
You see:
3. Type d:\setup (if it doesn’t appear automatically), where d is your CD-ROM
drive letter.
4. Click OK.
You see the progress bar, followed by the welcome screen.
5. Select from this decision table.
If you want to click on
continue with this Setup Next
You see “Enter name, company, and product
serial number.”
cancel Setup (because you have not
exited other Windows programs) Cancel
Close those programs then run Setup again.