Removing iolinx software – Rockwell Automation 1784-KTCS ControlNET Scanner Installation Instructions User Manual
Page 28
Advertising
28
ControlNet Scanner Card
Publication 1784-5.35 – April 1999
Removing IOLinx Software
Use the Start menu or the Add/Remove control panel applet to uninstall the
IOLinx software.
Important:
Uninstall will not succeed if the IOLinx folder is active on the
desktop.
You see:
1. Select from this decision table.
If you want to
press
remove the IOLinx software
Yes
You see the progress bar, which indicates the
percentage of files removed from your machine.
retain the IOLinx files on your machine
No
2. Press OK.
When removal is complete, you see a confirmation message.
3. Press OK.
4. Restart your machine.
Advertising