Rockwell Automation 1784-KTCS ControlNET Scanner Installation Instructions - Manual (Page 13)

ControlNet Scanner Card 13
Publication 1784-5.35 – April 1999
4. If you are using the card’s default base I/O space address setting, go to the
next section, Installing the Card.
If you are setting a new base I/O space address, set the switches to the up or
down position to reflect the selected address from Worksheet E.
20629–M
up (1)
down (0)
Side View Front View
220h
Factory-set address
(recommended setting)
Front of Switches
1 2 3 4
up (1)
down (0)
S3