Rockwell Automation 2706-P42R_P42C_P43R_P43C_P44R_P44C_P72CNx_P74CNx InView Marquee Message Display - Manual (Page 10)

Publication 2706-IN006E-EN-P
InView Marquee Message Display 9
Ceiling Mounting
1. Remove one screw from the top of the end cap.
2. Line up a ceiling bracket with the top hole on the sign’s end cap
so the bracket fits in the indentation. There are left and right
ceiling brackets. Use the one that fits with the screw hole’s
countersunk side facing out. Secure the ceiling bracket with the
screw removed in Step 1. Torque the screws to 2.7 Nm
(24 in-lb).
3. Repeat steps 1 and 2 for the other end of the sign.
4. Use chains (not supplied) to hang the sign from a ceiling.
Remove
this screw.
TIP
Use chains capable of supporting 4 times the total
weight of the sign(s).
TIP
The hole you select in the ceiling bracket for the
chain determines the angle at which the sign hangs.
Ceiling
bracket
Ceiling
bracket
mounted to
end cap.
Screw hole Screw