Rockwell Automation 2706-P42R_P42C_P43R_P43C_P44R_P44C_P72CNx_P74CNx InView Marquee Message Display - Manual (Page 7)

Publication 2706-IN006E-EN-P
6 InView Marquee Message Display
Wall Mounting
1. Remove the 4 screws and the end cap from one end of the sign.
2. Slide one of the wall mounting brackets onto the back of the
sign until it is approximately 0.5 in. away from the end of the
sign.
WARNING
!
Hazardous voltage. Contact with high voltage may
cause death or serious injury. Always disconnect
power to sign prior to servicing.
TIP
Remove only one end cap at a time.
Remove
these
screws.
33.13 (1.305)
127 (5.00)
2.65 (0.105)
33.13 (1.30)
25.40 (1.00)
12.70 (0.50)
7.62 (0.30)
17.65 (0.70)
75.95 (2.99)
40.64 (1.60)
30.35 (1.195)
30.35 (1.195)
4.04 (0.159) 10- 32 UNC-2B 2 Holes
7.11 (0.280) Thru 3 Holes
Wall mounting
bracket
0.5”
Wall
mounting
bracket