Rockwell Automation 2706-P42R_P42C_P43R_P43C_P44R_P44C_P72CNx_P74CNx InView Marquee Message Display - Manual (Page 14)

Publication 2706-IN006E-EN-P
InView Marquee Message Display 13
3. Tilt the sign to select a viewing angle. To hold the sign in place,
screw a Phillips screw (supplied) through one of the small holes
on each bracket into the screw hole in the sign case.
Electrical Connections
2706-P72 and 2706-P74
1. Open the front of the sign case by turning the quarter-turn
latches to the left with a large screwdriver. (On the
2706-P72CNx, there are 3 quarter-turn latches; on the
2706-P74CNx there are 4.) Carefully let the front of the case drop
forward.
184.15
(7.25 REF)
30.48 (1.20)
(0.50 REF)
(0.36 TYP)
139.70 (5.50)
69.85
(2.75)
19.05
(0.75)
8.74 x 12.70 (0.344 x 0.50)
OBRound Slot (3 Places)
End view,
wall-mounted
Hex bolt
Wall
End view,
ceiling-mounted
Hex bolt
Ceiling
Phillips screw Phillips screw
End view,
wall-mounted End view,
ceiling-mounted
Wall
Ceiling
TIP
Keep a minimum 1.0-inch (2.54 cm) clearance on all
sides of the sign for adequate ventilation.
WARNING
!
Hazardous voltage. Contact with high voltage may
cause death or serious injury. Always disconnect
power to sign prior to servicing.