Rockwell Automation 2706-P42R_P42C_P43R_P43C_P44R_P44C_P72CNx_P74CNx InView Marquee Message Display User Manual
Page 9
Advertising
Publication 2706-IN006E-EN-P
8 InView Marquee Message Display
8. Match the alignment holes of the brackets on the sign with the
alignment holes of the brackets on the wall so that the sign is at
the desired viewing angle.
9. Fasten the mounting brackets together using two 10-32 x 3/4
Phillips screws, two 10-32 washers, and two 10-32 lock nuts
through selected alignment holes on each end of the sign.
Torque to 2.7 Nm (24 in-lb).
10. Tighten the 5/16 nuts in the mounting holes. (See Step 7).
Torque to 2.7 Nm (24 in-lb).
Alignment holes
Mounting
bracket on the
wall
Mounting bracket
on the sign
TIP
The second mounting bracket is shown here for
illustration only. It is actually mounted to the wall.
Lock
nuts
Washers
Phillips
screws
Advertising