Rockwell Automation 2755 AdaptaScan Bar Code Readers - Manual (Page 45)

Installing the Wiring Base and Power Supply 3–10
Side Post Mounting
The mounting plate attaches to the bottom of the wiring base with
three screws that are provided with the base. The mounting bracket
post (flat side) attaches to the mounting plate with two hex socket
screws. Five sets of 2 holes allow the bracket post to attach to the
front, back or either side of the mounting plate. Lock the mounting
post in position by tightening the locking knob. For additional
security, you can remove the locking knob and replace it with the hex
bolt provided.
Mounting Plate to Reader Screws
Mounting Plate
Mounting Post to Mounting Plate Screws
Adjustable Mounting Bracket
(1/4 – 20 x .5 Hex Socket)
Bracket Locking Knob or
Bolt (5/16 x 1 inch)
3 Mounting Holes
(9 /32 inch diameter)
Use 3/16 inch Hex Wrench
Screws Provided Catalog No.
(3) #10-32 x 1/2 Inch 2755-NB40
(3) M5 -.8 x 16mm 2755-NB41