Rockwell Automation 2755 AdaptaScan Bar Code Readers - Manual (Page 48)

Installing the Wiring Base and Power Supply 3–13
Catalog No. 2755-PW46 Power Supply
The 120 VAC Power Supply (Catalog No. 2755-PW46) provides
power to one AdaptaScan Bar Code Reader. It is not rated for
industrial environments and must be mounted in a clean, dry location
or a suitable enclosure. Connections to the power supply are made at
the 3 screw terminals.
2.75 Inches
(70mm)
3.25 Inches
(83 mm)
+ –
Catalog No. 2755-PW47 Power Supply
The 240 VAC power supply (Catalog No. 2755-PW47) provides
power to one Reader. Included is a standard IEC 320 unterminated
power cord. The PW47 supply is not rated for industrial
environments and sets on a flat surface. Connections to the power
supply are made at the 3 screw terminals.
3 Inches
(76 mm)
5.25 Inches
(133)
+ – GND
1 2 3