Rockwell Automation 2755 AdaptaScan Bar Code Readers - Manual (Page 9)

Chapter
1
Overview
This chapter briefly describes the AdaptaScan Bar Code Reader.
Section Page
Typical System 1–2
Reader 1–3
Typical Applications 1–5
Scanning Modes 1–8
Wiring Base 1–9
Communication Options 1–11
AdaptaScan Software 1–14
Safety Labels 1–17
Options and Accessories 1–18
If you are familiar with the Series A Reader and/or are replacing a
Series A Reader, note the following changes in the Series B versions.
•
New programming port connector, programming cable and dust
cap.
•
Soft-start power circuit reduces the current inrush when power is
supplied. This allows more Readers to be powered using a single
supply. The soft–start circuit also allows the use of current
limited power supplies.
Programming Cable
Catalog No. 2755-NC48
Dust Cap
New Programming Connector
Important: The Series A Reader uses the 2755-NC43 programming
cable. This cable is not compatible with the Series B Reader.
Chapter Objectives
Series B Changes